Include Code Quality for Bitbucket never triggers a SonarQube™ analysis.

The most common scenario is an integration of the SonarQube™ analysis into your build pipeline.

A recommended flow with Include Code Quality for Bitbucket looks like:

1. New code changes pushed to Bitbucket (or new pull request is created)

   1. Bitbucket triggers your build pipeline for code changes

2. Your build pipeline must trigger the Sonar™ analysis

   1. and executes the Sonar™Scanneror one of its build system-dependent alternatives.

   2. see below for required parameters

3. SonarQube™ informs Include Code Quality for Bitbucket over a Webhook about a new analysis report.

   1. Include Code Quality for Bitbucket annotates existing pull requests with the issues found in the analysis.

Whichever external system you use to execute the Sonar™ scan, you need to run it with the correct parameters for your SonarQube™ application. Use the analysis parameter matrix below to find yours.

Analysis Parameter Matrix

The table shows the minimally necessary parameters to get Include Code Quality for Bitbucket to work with Sonar™Scanner. Look at the SonarQube™ documentation for additional parameters or different scanning methods.

sonar-scanner \
  -Dsonar.projectKey=<SONAR_PROJECT_KEY> \ 
  -Dsonar.host.url=<SONAR_SERVER_URL>

sonar-scanner \
  -Dsonar.projectKey=<SONAR_PROJECT_KEY_PREFIX:BRANCH_NAME> \
  -Dsonar.host.url=<SONAR_SERVER_URL>

sonar-scanner \
  -Dsonar.projectKey=<SONAR_PROJECT_KEY> \
  -Dsonar.host.url=https://sonarcloud.io \
  -Dsonar.organization=<SONAR_CLOUD_ORGANIZATION>

  -Dsonar.branch.name=<branch_name> 

  -Dsonar.

pullrequest.key=<pull request id from Bitbucket>
  -Dsonar.pullrequest.branch=<source branch name of pull request>
  -Dsonar.pullrequest.base=<destination branch name of pull request>

  -Dsonar.analysis.scmRevision=COMMIT_ID

  -Dsonar.analysis.scmRevision=COMMIT_ID

Build Systems

Bamboo

We provide a first class integration for Bamboo with our Sonar Include Code Quality for Bamboo plugin. See our dedicated wiki page for more information.

Jenkins

...

1. Use

...

1. https://plugins.jenkins.io/atlassian-bitbucket-server-integration/ to connect Jenkins to Bitbucket.

2. Install the the https://plugins.jenkins.io/sonar/ Jenkins plugin, follow the instructions on the Sonar™ Scanner for Jenkins Wiki to

...

1. configure your analysis.

2. [Community Edition] Install the https://plugins.jenkins.io/envinject/ plugin.

Community Edition: Freestyle Job

1. New 'Freestyle Job'

2. Select 'Bitbucket Server' for source code management

3. Select repository: enter */<yourMainBranch> as 'Branch specifier' in 'Branches to build'

4. Select "Bitbucket webhook trigger" and enable the pull request events

5. Add build steps

   1. Write out the sanitized SONAR_BRANCH to a file by adding a 'Execute Shell' task with content:

      Code Block
      language bash
      echo SONAR_BRANCH=$(printf '%s' $GIT_BRANCH | cut -d'/' -f 2- | sed s/[^0-9a-zA-Z:_.\-]/'-'/g) > sonar-branch

   2. Inject this variable with an 'Inject environment variable' step: select `sonar-branch` as 'Properties filepath'

   3. Add 'Execute SonarQube Scanner' step: override project key and project name in the 'Analysis Properties' field like:

      Code Block
      sonar.projectKey=my.plugin.key:${SONAR_BRANCH} sonar.projectName="Sonar Test Project - ${SONAR_BRANCH}"

6. Save configuration

7. Trigger analysis with 'Build Now', it should successfully analyze your main branch

...

(Community Edition only) SonarQube™ versions 7.9.x and 8.x need to replace illegal branch characters.
Use the following command to export the sanitized branch name to a file:

...

2. Change the 'Branch specifier' to ** to listen to all branches

3. Create a Pull Request in Bitbucket and verify an analysis is triggered

Community Edition: Multibranch Pipeline

1. Add a 'Multibranch Pipeline'

2. Select 'Bitbucket Server' for 'Branch Sources' and add a Repository

3. Add 'Bitbucket webhook trigger' to 'Scan Multibranch Pipeline Triggers' → enable push/pull-request events

4. Save

Add a Jenkinsfile to the repository. It needs needs to calculate the sonar.projectKey for the current branch (See https://mibexsoftware.atlassian.net/wiki/spaces/MSS/pages/3071082501/Sonar+Analysis+Configuration#Analysis-Parameter-Matrix)

Below is an example of such a pipeline:

pipeline {
    agent any
    environment {
        scannerHome = tool name: 'scanner', type: 'hudson.plugins.sonar.SonarRunnerInstallation' 
        SONAR_BRANCH = sh(returnStdout: true, script: "printf '%s' $GIT_BRANCH | 

...

sed 

...

'

...

s/[^0-9a-zA-Z:_.\\-]/-/

...

To inject the environment variable from the file sonar-branch , you also need to install the Jenkins EnvInject Plugin.

...

g'")
    }
    stages {
        stage('Analysis') {        
            steps {
                withSonarQubeEnv('sonar') {
                    sh "${scannerHome}/bin/sonar-scanner -Dsonar.projectKey=test.pipeline.proj:$SONAR_BRANCH -Dsonar.projectName=\"Awesome Pipeline - $SONAR_BRANCH\"" 
                }
            }
        }
    }
}

Developer Edition or higher: Multibranch Pipeline

1. Add a 'Multibranch Pipeline'

2. Select 'Bitbucket Server' for 'Branch Sources' and add a Repository

3. Add 'Bitbucket webhook trigger' to 'Scan Multibranch Pipeline Triggers' → enable push/pull-request events

4. Save

Use this Jenkinsfile for inspiration:

pipeline {
    agent any
    environment {
        scannerHome = tool name: 'scanner', type: 'hudson.plugins.sonar.SonarRunnerInstallation' 
    }
    stages {
        stage('branch analysis') {
            when { 
              not {
                changeRequest()
              } 
            }
            steps {
                withSonarQubeEnv('sonar-cloud') {
                sh "${scannerHome}/bin/sonar-scanner -Dsonar.branch.name=${env.BRANCH_NAME}"
                }
            }
        }
        
       
        stage('PR analysis') {
            when {
                changeRequest()
            }
            steps {
                withSonarQubeEnv('sonar-cloud') {
                sh "${scannerHome}/bin/sonar-scanner \
                      -Dsonar.pullrequest.key=${env.CHANGE_ID} \
                      -Dsonar.pullrequest.base=${env.CHANGE_TARGET} \
                      -Dsonar.pullrequest.branch=${env.CHANGE_BRANCH}"
                }
            }
        }
    }
}

Problems During Setup

We at Mibex Software are happy to help you in our support desk or at support@mibexsoftware.com

...